The development of the Indian textile industry should focus on technical textiles and non-woven fabrics.

The development of the Indian textile industry should focus on technical textiles and non-woven fabrics. India also has great potential in other markets, especially technical textiles, but also medical textiles.4 billion US dollars. This is because the domestic nonwovens market in India has considerable growth potential in the future. The reason is that India's population has a high birth rate, especially the increase in women, and its consumption potential is huge. It is estimated that it will not be long before it will stabilize like European and American countries.

In recent years, the Indian market has been closely following the pace of the Chinese market, and India has a population similar to that of China. However, in other developing countries, the use of non-woven fabrics has not yet been popularized. If so, the total consumption level can reach 82. Due to the large population, the use of non-woven fabrics is still very large. This brings unlimited business opportunities to non-woven fabric manufacturers. The market share and growth rate of non-woven fabrics in the Chinese market are obvious to all countries. It can be seen from India's several five-year plans that the non-woven and technical textile industry has become a key development area in India.The Indian non-woven market contains unlimited business opportunities

Everyone knows that non-woven fabrics belong to an emerging industry, which was first introduced by developed countries such as Europe and the United States.

In 2015, the output value of the Indian nonwovens market accounted for 8% of the Asian nonwovens market. It is expected that in 2020, the output value of 3-Layer Face Mask suppliers in the Indian non-woven market will account for 12% of the Asian market, showing a trend of rapid development. This is the case in the Indian market .. By 2018, the average woman in India will consume 2 US dollars of non-woven hygiene products. It is believed that more Chinese non-woven fabric merchants will dig gold mines in the Indian market. Today, the growth rate of non-woven fabric usage in China has also slowed down. Although the central government provided a 10% rebate on capital investment, this incentive mechanism failed to induce more manufacturers to invest in non-woven technology.

India is the world's second largest textile and clothing producer after China.

India's non-woven consumption level will increase by 20% from 2014 to 2018. Everyone has high expectations for the Indian market. The use of non-woven fabrics in developed countries has tended to balance for a long time

Megosztás a facebookon

Mask non-woven fabric manufacturers tell you how to choose masks

If you purchase a mask like this, KN95 respirator companynot only will it fail to provide a real protective effect, but it will also cause people to make a wrong judgment, thinking that they are not polluted, but in fact they are in a polluted environment. knowledge. Some defective masks do not even cover the entire mask and breathing area with filter materials, and harmful particles can easily enter the breathing area. Buying non-woven masks Please pay attention to the latest developments of our company. Now I find that many people around me are wearing masks, not only for protection, but also for decoration, because nowadays, colorful masks, In addition, there are many cute patterns on it, which are very beautiful. In addition, the adhesion of the mask to non-woven fabric is also important for anti-haze. The good-looking masks on the market are not practical. Fine particles can easily penetrate through the mesh of the cloth or leak in from the non-adjacent part of the mask and the touch part of the face. I used to think that only doctors or nurses need to wear masks.

Generally, cloth masks are mostly flat-planned and cannot be closely attached to the face. Many young people like to wear such masks, which can not only protect but also decorate, but are such masks really good? Let's take a look at non-woven fabrics. We will introduce you to some non-woven fabrics. We will introduce some non-woven fabrics to you. I hope that when you buy masks, you will still buy masks for protection.5. Please pay attention to the newer developments of our company. Consumers should carefully check the tightness between the mask and the face after trying them on when buying a mask.5 or bacteria, ** and other microbial particles. You must learn to choose and want to know how to choose a good non-woven fabric. An excellent protective non-woven mask should have the function of an activated carbon mask to isolate fine suspended particles such as PM2. The environment around us is getting worse and worse, and the smog is getting worse. The manufacturer introduces how to choose a good mask .. General masks and disposable non-woven masks can have a blocking effect on dust and large particles, but they are not satisfied with the protection of smog, PM2.Mask non-woven fabric manufacturers tell you how to choose masks

Megosztás a facebookon

Many products are actually made of non-woven fabrics

. 5. Affected by the environment and the normalization of the epidemic, disposable mask non-woven fabrics will usher in a larger market. Many products are actually made of non-woven fabrics, such as masks, non-woven bags, masks, diapers, etc. Non-woven fabrics are widely used in our lives. Water repellency and breathability: The non-woven fabric of the mask does not absorb water, has zero water content, and the finished product has good water repellency, porosity, good air permeability, and is easy to wash. These products are used in our lives.　　

2. As for the characteristics of non-woven masks, I believe everyone has understood through reading the article, because these advantages make the masks we use have good air permeability, and they will not create an impression on our skin due to long-term matching.　　

4. Green and hygienic: The products are produced with FDA food-grade materials, no other chemical ingredients, stable functions, non-toxic, and do not affect the skin. The raw material of the mask non-woven fabric is polypropylene. The frequency of use is relatively high, which shows that we have a great demand for non-woven fabrics. Manufacturers use assembly line production methods to improve production efficiency and improve efficiency without reducing quality. The strength of the finished product is better than that of ordinary staple fiber products.　　

3. The chemical structure of polypropylene is not strong, and the molecular chain is very simple to crack, and then it can be degraded well, and enter the next environmental cycle in a non-toxic shape. The strength is non-directional, and the strength is close to the vertical and horizontal directions. Bacteriostasis: It is a water-repellent, does not mold, and can prevent the corrosion of bacteria and insects in 3-Layer Face Mask company the liquid, and does not mold. The mask non-woven fabric can be differentiated within 90 days. The demand for mask non-woven fabrics has increased in recent years, so what are the characteristics of mask non-woven fabrics? Let's analyze it together and have a detailed understanding of mask non-woven fabrics. The subsequent processing of the cloth has also been resolved. Good physical properties: It is made of polypropylene spun yarn directly laid into a net and thermally bonded. Waste masks are non-woven. 1

Megosztás a facebookon

Masks are a kind of sanitary products

Masks are a kind of sanitary products, which are generally worn on the mouth and nose to filter the air entering the mouth and nose to block harmful gases, odors, droplets, viruses and other substances. They are made of gauze or paper. Masks have a certain filtering effect on the air entering the lungs. When respiratory infectious diseases are prevalent, when working in dust and other polluted environments, wearing masks has a very good effect. Masks can be divided into air filter masks and air supply masks. Mask classification: N series: protection of non-oily suspended particles without time limit R series: protection of non-oily suspended particles and sweat oily suspended particles with a time limit of eight hours P series:

Therefore, the anti-aerosol-containing filter material must undergo special electrostatic treatment to achieve Air Through Nonwoven Suppliers  the purpose of preventing fine dust. Therefore, each series is divided into 3 levels: 95%, 99%, 99.97% (referred to as 95, 99, 100 for short), so there are 9 sub-categories of filter media. EU EN149 standard: FFP1 type mask: minimum filtration effect》 80% FFP2 mask: minimum filtration effect》 94% FFP3 category mask: minimum filtration effect》 97% Australia AS1716 standard P1: minimum filtration effect》 80% P2: minimum filtration effect》 94%

Megosztás a facebookon

The manufacturing processes for disposable masks

What are the manufacturing processes for disposable masks?　　

The first step of the disposable mask manufacturing process: Laminating and compacting place the non-woven fabric and meltblown fabric on the production line, and press them together by the machine. The second step of face mask manufacturing: folding and pressing. 　　　　

There are three inclined planes on the machine, and the pressed large non-woven fabrics gather along these three inclined planes to form a 'folded structure'. Similarly, the surface of the mask is compacted by the machine flattening the connecting rod.　

Step 3: Cut the lock 　　　　

Cut the pressed cloth into small pieces, and then lock the edges one by one.　　　　

Step 4: Matching the wire 　　　　

During this process, a metal wire (ie nose clip) will be matched and transported at the same time to pull into the edge. When wearing, fix the mask on the bridge of the nose by kneading the metal wire to maintain a good seal.　　　　

Step 5: Attach the ear rope to the narrow side of the small piece of non-woven fabric with metal wire. The ear rope is flattened together with the crimp to fix the ear rope. Complete the complete mask.　　　　

Step 6: Inspection

The staff will conduct random inspections on some masks, and put the qualified products into the qualified area for disinfection and sterilization.　　　　

The seventh step of the manufacturing process of disposable masks: disinfection and sterilization batches of qualified masks are sent to the disinfection room for disinfection and sterilization. Since non-woven fabrics are not resistant to high temperatures, ethylene oxide gas is usually used for sterilization. Through this step, qualified medical masks can be packaged and sold. The above content is sorted out and released by disposable protective mask manufacturers, please indicate when reprinting!

Megosztás a facebookon